Skin-friction drag reduction in the turbulent regime using random-textured hydrophobic surfaces

Abstract

Technologies for reducing hydrodynamic skin-friction drag have a huge potential for energy-savings in applications ranging from propulsion of marine vessels to transporting liquids through pipes. The majority of previous experimental studies using hydrophobic surfaces have successfully shown skin-friction drag reduction in the laminar and transitional flow regimes (typically Reynolds numbers less than ≃106 for external flows). However, this hydrophobicity induced drag reduction is known to diminish with increasing Reynolds numbers in experiments involving wall bounded turbulent flows. Using random-textured hydrophobic surfaces (fabricated using large-length scalable thermal spray processes) on a flat plate geometry, we present water-tunnel test data with Reynolds numbers ranging from 106 to 9 × 106 that show sustained skin-friction drag reduction of 20%–30% in such turbulent flow regimes. Furthermore, we provide evidence that apart from the formation of a Cassie state and hydrophobicity, we also need a low surface roughness and an enhanced ability of the textured surface to retain trapped air, for sustained drag reduction in turbulent flow regimes. Specifically, for the hydrophobic test surfaces of the present and previous studies, we show that drag reduction seen at lower Reynolds numbers diminishes with increasing Reynolds number when the surface roughness of the underlying texture becomes comparable to the viscous sublayer thickness. Conversely, test data show that textures with surface roughness significantly smaller than the viscous sublayer thickness and textures with high porosity show sustained drag reduction in the turbulent flow regime. The present experiments represent a significant technological advancement and one of the very few demonstrations of skin-friction reduction in the turbulent regime using random-textured hydrophobic surfaces in an external flow configuration. The scalability of the fabrication method, the passive nature of this surface technology, and the obtained results in the turbulent regime make such hydrophobic surfaces a potentially attractive option for hydrodynamic skin-friction drag reduction.