Size-structure-property relationship of wood particles in aqueous and dry insulative foams

Abstract

Three size-fractionated samples of pine beetle-killed wood particles were used to prepare lightweight insulative foams. The foams were produced by foam-forming an aqueous slurry containing wood particles (125–1000 μm), a polymer binder, and surfactant, followed by oven drying. The effect of wood particle size on the aqueous foam stability, structure, and performance of insulative foams was investigated. While all aqueous foams were highly stable, aqueous foam stability increased with decreasing particle size. For dry foams, the cell size distribution was similar for all particle sizes as it was primarily controlled by the surfactant; differences occurred within the cell wall structure. A size-structure-property relationship was identified using x-ray micro-computed tomography where smaller particles produced lighter cell wall frameworks, leading to lower densities and decreased thermal conductivity and compressive strength. Larger particles produced denser cell wall frameworks that were more resistant to deformation, although all dry foams had sufficient mechanical properties for use as insulation panels. Thermal conductivity for all wood particle size-fractionated samples was <0.047 W m−1 K−1 making the foams similar to expanded polystyrene/polyurethane and supporting their use as thermal insulation in buildings.