Abstract

The purpose of this work is to introduce and evaluate a capacitive monitoring array capable of continuous 6DOF cranial motion detection during high precision radiotherapy. The ring-shaped capacitive array consists of four equally sized conductive sensors positioned at the cranial vertex. The system is modular, non-contact, and provides continuous motion information through the thermoplastic immobilization mask without relying on skin monitoring or use of ionizing radiation. The array performance was evaluated through a volunteer study with a cohort of twenty-five individuals. The study was conducted in a linac suite and the volunteers were fitted with an S-frame thermoplastic mask. Each volunteer took part in one data acquisition session per day for three consecutive days. During the data acquisition, the conductive array was translated and rotated relative to their immobilized cranium in 1-millimetre and 1-degree steps to simulate cranial motion. Capacitive signals were collected at each position at a frequency of 20 Hz. The data from the first acquisition session was then used to train a classifier model and establish calibration equations. The classifier and calibration equations were then applied to data from the subsequent acquisition sessions to evaluate the system performance. The trained classifiers had an average success rate of 92.6% over the volunteer cohort. The average error associated with calibration had a mean value below 0.1 mm or 0.1 deg for all six motions. The capacitive array system provides a novel method to detect translational and rotational cranial motion through a thermoplastic mask.

Full Text
Published version (Free)

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call