Abstract
Porous ceramsite features excellent sound-absorption performance which is governed by the pore characteristics, such as pore size, apparent porosity, and interconnected pore network. In this work, porous sound-absorption ceramsite with different apparent porosities was prepared by using ammonium hydrogen carbonate as pore former.The effects of pore former dosage, heating rate, and curing time on the microstructure of the obtained ceramsite were investigated. The results revealed that the pore size and apparent porosity increase as a function of the pore former dosage and heating rate, respectively; whereas decrease as a function of curing time. For the ceramsite without curing, a maximum apparent porosity of 32.67% could be reached under a pore former dosage of 2.0% and a heating rate of 20.0 °C/min; however, for those cured for 72 h, the maximum apparent porosity was estimated to be only 27.43%. The sound-absorption performance correlated positively with the apparent porosity, whereas the growth and decline of pore size resulted in fluctuation of sound-absorption coefficient within the frequency rang of 200–2000 Hz because the linear flow resistance and the air friction increase with the decrease of the pore diameter.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
