Abstract
The effect of the heating temperature on the properties of sintered ceramic bodies from three different contaminated marine sediments was investigated. The sintering behaviour was evaluated by means of the variation of shrinkage degree, bulk density, water absorption, open and closed porosity, while the phases transformation were investigated by differential thermal analysis (DTA), X-ray diffraction (XRD) and scanning electron microscopy (SEM). The results have shown that the sintering process follows a viscous liquid phase mechanism due to the formation of a glassy phase. The optimum sintering temperature is 1125 °C for Astilleros and Cuchia sediments and 1150 °C for Raos sample. Above this temperature, a significant overfiring with an increase of closed porosity was observed. Water absorption values and mechanical properties as bending and compressive strengths of sintered bodies show that the investigated marine sediments are suitable to be used as secondary raw materials in ceramic tiles and bricks production.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
