Abstract
Dense tantalum carbide (TaC) ceramics were prepared using TaC nanopowder via spark plasma sintering (SPS). The effects of the sintering temperature and applied pressure on the densification and grain growth behaviour of TaC ceramics were investigated. The results showed that high temperature and pressure promoted sintering densification, while their increase caused an increase in the grain size of TaC ceramics. A highly dense TaC ceramic (∼97.19%) with a fine grain size of 2.67 μm was obtained by sintering at 1800 °C for 10 min under 80 MPa. The Vickers hardness, Young's modulus and fracture toughness were 15.60 GPa, 512.66 GPa and 3.59 MPa·m1/2, respectively. The densification kinetics were investigated using a creep deformation model. Diffusion and grain boundary sliding were proven to be the dominant densification mechanisms based on the stress and grain size exponents combined with the microstructural characteristics. The apparent activation energy of the mechanism controlling densification was 252.94 kJ/mol.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
