Abstract
Thermally robust monolayers of 4-6 nm diameter FePt nanoparticles (NPs) were fabricated by combining chemical synthesis and atomic layer deposition. Spin-cast monolayers of FePt NPs were coated with thin, 11 nm-thick layers of amorphous Al(2)O(3), followed by annealing to convert the FePt NPs from an alloy (A1) into intermetallic FePt (L1(0)) and FePt(3) (L1(2)) phases. The Al(2)O(3) layer serves as a barrier that prevents sintering between NPs during annealing at temperatures up to 730 °C. Electron and X-ray diffraction in conjunction with high-angle annular dark-field scanning transmission electron microscopy (HAADF-STEM) show that as-synthesized A1 FePt NPs convert into L1(0) and L1(2) phase NPs through annealing. HAADF-STEM measurements of individual NPs reveal imperfect ordering and show that the NP composition determines which intermetallic phase is obtained. Mixed-phase NPs with L1(0) cores and FePt(3) L1(2) shells were also observed, as well as a smaller number of unconverted A1 NPs. These results highlight the need for improved control over the compositional uniformity of FePt NPs for their use in bit-patterned magnetic recording.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have