Abstract
This study presents single-phase and two-phase frictional characteristics inside small diameter wavy tubes. A total of twelve tubes was used for testing. The ranges for the geometric parameters of the tested wavy tubes are diameter D = 3.43 - 8.29 mm, curvature ratio 2R/D = 3.70 - 7.87, and the ratio of the spacer length L/D = 1.93 - 30.5. For single-phase flow, the bend friction factor increases with the decrease of curvature ratio and spacer length. A friction factor equation is developed based on the experimental data with characterizing parameters like 2R/D, L/D, new Dean number, and Reynolds number. A fair agreement of the f C data and the predictions with a mean deviation of 10.07 % is observed. The frictional two-phase multiplier in U bend can be correlated by using the Chisholm correlation. By introducing the Martinelli parameter and the liquid Froude number to the Chisholm correlation, a new correlation is proposed that can describe the frictional multiplier data, with a mean deviation of 15.86% based on the preset 574 data and the authors' previously reported 279 data
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callMore From: International Communications in Heat and Mass Transfer
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
