Abstract

All-optical ultrasound probes with fully integrated ultrasound generation and detection functions demonstrate some unique advantages over traditional electroacoustic counterparts. However, due to the lack of an effective solution, the most commonly used method is to assemble two separate functional optical fibers together for ultrasound generation and detection, respectively. In this Letter, an innovative strategy, to the best of our knowledge, is developed to integrate the photoacoustic effect based ultrasound generation and the Fabry-Pérot (FP) interference based ultrasound detection structures together at the end of a single double clad optical fiber (DCF), so as to make a compact forward-viewing ultrasound self-transceiving probe (1-mm diameter). From the experiment results, the as-fabricated probe can generate an ultrasound signal with an amplitude of 2.36 MPa at 2.25 mm in the transmitting mode, and its peak frequency and -6-dB bandwidth are measured to be 10.64 MHz and 22.93 MHz, respectively. When being operated under the receiving mode, the probe has a detection sensitivity of 208.4 mV/MPa for ultrasound signals with the peak frequency of 8.24 MHz, and the noise equivalent pressure (NEP) is 76.8 kPa. In addition, the forward-viewing format ultrasound self-transceiving experiment is also performed and the pulse-echo signal varying with the transmission distance is successfully captured for the first time.

Full Text
Published version (Free)

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call