Abstract
In this paper, a single-frequency erbium-doped fiber laser based on self-injection feedback is reported, which uses a high-reflectivity broadband fiber Bragg grating, an ordinary commercial high-doped erbium fiber and a low-reflectivity broadband fiber Bragg grating to form the main resonant cavity, and a stable narrow linewidth single-frequency laser output is achieved by connecting a single-mode fiber and a low reflectivity narrowband fiber Bragg grating to form self-injection feedback. Then, a saturated double-pass erbium-doped fiber amplifier and a saturable absorber were added to the self-injection optical path, which well suppressed the relative intensity noise and phase noise and the relaxation oscillation intensity was well suppressed by about 18.08 dB, and the phase noise was 36.7dBc·Hz-1 suppression, the edge-mode rejection ratio is increased by 13 dB, and the final laser linewidth is about 270 Hz, and the output power is 8.5 dBm.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
