Single Degree of Freedom Shear-Mode Piezoelectric Energy Harvester

Abstract

An energy harvester operating in the thickness-mode (TMH) or longitudinal-mode (LMH) consists of a piezoelectric element which is sandwiched between a proof mass and a base. The piezo-element is poled along a direction perpendicular to the electrodes. When the base is subjected to a sinusoidal excitation, along the poling direction, a relative motion is generated between the proof mass and the base producing mechanical strain in the piezoelectric element. The resulting strain is converted into electrical power by virtue of the direct piezoelectric effect. In this study, a shear-mode harvester (SMH) is considered as a viable alternative to the TMH and LMH to enhance the harvested output power. The enhancement is generated by capitalizing on the fact that the strain constant of the piezoelectric in shear is much higher than those due to thickness or longitudinal deflections. To achieve such an enhancement, the piezoelectric element is poled along a direction parallel to its electrodes and is sandwiched between a proof mass and oscillating base in a design similar to that of the TMH and the LMH. Sinusoidal excitation of the base, along the poling direction, makes the piezo-element experience mechanical shear strain which when converted into electrical power produces outputs that are larger than those of the TMH and the LMH. The theory governing the operation of this class of SMH is developed for simple resistive electrical loads. Numerical examples are presented to illustrate the optimal performance characteristics of the SMH in comparison with the TMH and LMH. The effect of the piezo-element material, excitation frequency and electrical load on the harvested power is presented. The obtained results demonstrate the feasibility of the SMH as a simple and effective means for enhancing the power output characteristics of conventional TMH and LMH.