Abstract
Single- and dual-fiber fluorescence probes have been utilized to study oil-film behavior in a firing Diesel engine. A detailed analysis of the response characteristics of these probes was performed, and universal response curves have been generated through identification of the appropriate nondimensional parameters. For single-fiber probes a single curve was obtained, and for dual-fiber probes families of curves were identified based on three geometric dimensionless parameters. The complementary response characteristics of the single- and dual-fiber probes allows determination of the oil distribution within the piston-liner gap. The dual-fiber probe is not sensitive at small distances. Thus its signal originates solely from the piston surface, whereas the single-fiber probe is most sensitive at small distances and hence to the wall oil film. The engine data from the dual-fiber probe confirmed the presence of an oil film on the piston and provided a means of quantifying the transport of this oil within the engine.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.