Abstract
ABSTRACT This work studied the effects of an on-line static magnetic field on the defects, microstructures, and mechanical properties of AlSi7Mg samples fabricated by laser powder bed fusion (LPBF). Process experiments were carried out on a self-developed LPBF equipment with an on-line static magnetic field generating system, where magnetic field intensity was adjustable from 0 to 0.3 T. With the action of static magnetic field, the relative density of samples increased from 96.9% to 98.6%. Furthermore, the solidification front of the columnar grain in the mushy zone was broken. With the increase of magnetic field intensity, the crystallographic orientation changed from strong <001> to <001>, <101> and <111> uniform distribution and the average grain was gradually refined from 8.35 to 7.22 μm. Based on the above optimisation, the ultimate tensile strength increased from (326.67 ± 5.31) MPa to (382.00 ± 2.45) MPa. Simultaneously, the elongation at break increased from 8.48% ± 0.20% to 11.78% ± 0.20%. In general, the reduction of pores, the refinement of grains and the increase of Mg2Si precipitates contributed to the simultaneous enhancement of strength and toughness together. This study could provide a new idea for laser additive manufacturing of excellent performance aluminum alloys.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
