Abstract
AbstractIn the present study, SrTiO3 was selected to enhance the multiferroic characteristics of Bi0.88Sm0.12FeO3 (BSF) ceramics. With increasing SrTiO3 content, the principal phase of BSF ceramic transitions from rhombohedral R3c to Pna21. Through DSC and dielectric analysis, it was observed that both the Curie temperature and Néel temperature decreased proportionally with the augmentation of SrTiO3 content. When x = .1, the optimal ferroelectric performance is achieved, and the highest remanent polarization value is 55.47 µC/cm2, significantly surpassing that of BSF ceramics. Moreover, the PFM test results showed that as the substitution content increased, the domains in the BSF ceramic gradually transformed from normal ferroelectric domains to polar nanomicro‐domains. Magnetic and magnetoelectric results show that when x = .1, the best magnetic properties are obtained, Mr = 59.7 emu/mol. The magnetoelectric coefficient αME initially increased and then decreased with the increasing SrTiO3 content, reaching its optimum magnetoelectric properties at x = .1, where αME = .47 mV cm–1 Oe–1. In summary, when the substitution amount of SrTiO3 reaches 10%, the ferroelectric, magnetic, and magnetoelectric properties of BSF ceramics are significantly improved.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
More From: International Journal of Applied Ceramic Technology
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.