Abstract
This paper presents a new method for numerically calculating the concentration profiles of both solid calcium and total chloride ions (Cl−) in concrete in contact with 3% (0.5 mol/l) sodium chloride (NaCl) solution. Since the diffusion of ions present in the pore solution is a primary controlling factor, the application of mutual diffusion coefficients of corresponding ions that are influenced by the concentration of other coexisting ions is proposed. The method of calculation is based on the generalized form of Fick's First Law suggested by Onsager, which is composed of the Onsager phenomenological coefficient and the thermodynamic force between ions, which occurs according to the gradient of electrochemical potential in a multicomponent concentrated solution for the pore solution. In addition, the chemical equilibrium for Ca(OH)2 dissolution and C-S-H decalcification are also modeled and coupled with diffusion. Increased porosity due to dissolved Ca2+ and a chloride binding isotherm are taken into consideration. The concentration profiles of solid calcium and the presence of Friedel's salt in mortar specimens are experimentally identified by the X-ray diffraction method (XRD) and the thermal analysis (TG/DTA) as well as the total chloride profile using an acid extraction method after three years of exposure to 0.5 mol/l NaCl solution. This experimental result verifies the calculation result.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.