Abstract
Sulfur dioxide (SO2) and trace metal such as mercury emission during combustion of low-rank coal cause a significant impact on the environment and health. Flue gas at coal-fired power stations is one of the main sources for the emissions of SO2 and mercury metal. Low-cost and sustainable technologies for the removal of SO2 and mercury from flue gas have become increasingly important nowadays. This paper presents the study of simultaneous removal of SO2 and mercury over natural zeolite as an adsorbent in briquette and pulverized. The research is focused on evaluating adsorbent to coal optimum ratio towards adsorption performance on SO2 and mercury removal. The experiments on the removal of SO2 and mercury were carried out using horizontal electric furnace with different combustion temperature and adsorbent ratio. SO2 in the flue gas as the result of the combustion process which exits from the outlet was analyzed using Gas Combustion and Emission Analyzer (E4400, E-Instrument). Mercury metal residues in the bottom ash were analyzed using NIC Mercury SP Analyzer. An increasing zeolite adsorbent SO2 content in flue gas decreased. The optimum SO2 removal was determined on 4% zeolite adsorbent ratio. It also has been found that 8% natural zeolite ratio to low-rank coal show optimum condition to adsorb mercury for all temperature condition for both briquette and pulverized conditions.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
