Year-end Sale % OFF 
Abstract
Removal of common pesticides methyl parathion and chlorpyrios was investigated through coagulation/flocculation using two commercial coagulants alum [Al2(SO4)3·18H2O] and ferric chloride (FeCl3). The removal efficiency of both pesticides was evaluated by varying the initial pH (4–9), coagulant dose (20–120mg/L) and coagulant type. Response surface methodology (RSM) was used to design the jar-test experiments and central composite design (CCD) was used to analyze the effects of initial pH and coagulant on COD and pesticide removal. The most significant effect on removal efficiency was observed with FeCl3. Optimum dose of alum and ferric chloride was found to be 80 and 60mg/L, respectively. The maximum concentration removal was 79% for methyl parathion and 82% for chlorpyrifos solution, respectively. The results demonstrated that FeCl3 caused higher removal compared to alum.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
