Abstract

It is proposed a closed-loop treatment cycle for Cr(III) removal from contaminated soils (2080 mg/kg). The treatment includes the use of lactic acid as washing agent, and the recovery of both Cr(II) and lactic acid from the spent solution. Results indicate that Cr(III) removal efficiency can be very high, passing 70% in all tested operative conditions. The metal forms strong complexes with lactic acid, and therefore cannot be eliminated through direct precipitation simply increasing the pH value. Therefore, lactic acid is preliminarily extracted from the solution using n-butanol at very acidic pH. The obtained extraction degree is generally high, varying between 0.5 and 1 according to the amount of used n-butanol solution. After lactic acid extraction, almost 100% of chromium can be recovered through precipitation in alkaline conditions. Lactic acid, in turns, can be purified and reused for a new washing treatment, separating it from n-butanol solution through water extraction. The extraction efficiency is once more satisfying (around 0.5), and not dependent on the operative pH.

Full Text
Paper version not known

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call

Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.