Simultaneous removal of arsenate and arsenite in water using a novel functional halloysite nanotube composite.

Abstract

This work aims at exploring a novel environment-friendly nanomaterial based on natural clay minerals for arsenic removal in aqueous samples. Halloysite nanotubes (HNTs) were selected as the substrate with Mn oxides loaded on the surface to enhance its arsenic adsorption ability and then grafted onto the SiO2-coated Fe3O4 microsphere to get a just enough magnetic performance facilitating the material's post-treatment. The prepared composite (Fe3O4@SiO2@Mn-HNTs) was extensively characterized by various instruments including Fourier transform infrared spectroscope (FTIR), scanning electron microscope (SEM), transmission electron microscope (TEM), thermogravimetric analysis (TG), vibrating sample magnetometer (VSM), X-ray photoelectron spectroscope (XPS), and X-ray diffraction (XRD). Batch experiments were carried out to get the optimum test conditions for arsenic adsorption by the composite, including pH, loading amount of Mn oxides, adsorbent dosage, and the co-existing ions. The adsorption of AsIII and AsV on Fe3O4@SiO2@Mn-HNTs were both well fitted with the pseudo-second-order kinetic model as well as the Langmuir adsorption isotherm model revealing the chemisorption between arsenic and Fe3O4@SiO2@Mn-HNTs. The adsorption process of AsIII and AsV were both endothermic and spontaneous displayed by the thermodynamic study. The capacities of the prepared composite are 3.28mgg-1 for AsIII and 3.52mgg-1 for AsV, respectively, which are comparable or better than those of many reported materials in the references. Toxicity characteristic leaching procedure (TCLP) and synthetic precipitation leaching procedure (SPLP) tests were carried out to access the secondary environmental risk of the composite and showed that it was quite environmentally stable and can be safely disposed. The composite was successfully applied in environmental water samples indicating its great potential applicability in future.