Simultaneous measurements of heat of hydration and chemical shrinkage on hardening cement pastes

Abstract

Isothermal calorimetry and chemical shrinkage measurements are two independent techniques used to study the development of hydration in cementitious systems. In this study, calorimetry and chemical shrinkage measurements were combined and simultaneously performed on hydrating cement paste samples. Portland cement pastes with different water to cement ratios and a cement paste containing calcium sulfoaluminate clinker and anhydrite were studied. The combined calorimetry/chemical shrinkage test showed good reproducibility and revealed the different hydration behavior of sealed samples and open samples, i.e., samples exposed to external water during hydration. Large differences between sealed and open samples were observed in a Portland cement paste with low water to cement ratio and in the calcium sulfoaluminate paste; these effects are attributed to self-desiccation of the sealed pastes. Once the setup is fully automatized, it is expected that combined calorimetry/chemical shrinkage measurements can be routinely used for investigating cement hydration.