Abstract
A Mach-Zehnder interference fiber-optic sensor for simultaneous measurement of temperature and refractive index (RI) is proposed and fabricated. In the sensing structure, no-core fiber (NCF) is cascaded with fiber Bragg grating (FBG), two enlarged tapers between NCF and the single-mode fiber serve as the light coupler, and the shrinked taper between two NCFs is used to enhance the interference effect. The different diameter influence of the shrinked taper on the sensing performance of RI and temperature has been evaluated, and the optimum diameter has been obtained. By monitoring the wavelength shift of FBG and the interference dip in the transmission spectra, the simultaneous measurement of temperature and RI is achieved. The maximum sensitivities of the attenuation peak to RI and temperature are 201.7157 nm/RIU and 87.4 pm/°C, respectively. The sensitivities of FBG to RI and temperature are 80.6 pm/RIU and 13.5 pm/°C, respectively. The transformation matrix has also been given. Own to the simple fabrication and high sensitivity, the sensor has the potential application in simultaneous measurement of multiple parameters.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.