Abstract
Two-step deposition method has been widely exploited to fabricate FA1-x Csx PbI3 perovskite solar cells. However, in previous studies, CsI is mainly added into the PbI2 precursor with DMF/DMSO as solvent. Here in this study, a novel method to fabricate FA1-x Csx PbI3 perovskite has been proposed. The CsI is simultaneously added into the PbI2 precursor and the organic FAI/MACl salts solution in our modified two-step deposition process. The resulting FA1-x Csx PbI3 film exhibits larger perovskite crystals and suppressed defect density (4.05×1015 cm-3 ) compared with the reference perovskite film (9.23×1015 cm-3 ) without CsI. Therefore, the obtained FA1-x Csx PbI3 perovskite solar cells have demonstrated superior power conversion efficiencies (PCE=21.96 %) together with better long-term device stability.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
