Abstract
AbstractFuel-oil contamination of groundwater and waterways is common throughout the world. The fuel components methyl-tert-butyl ether (MTBE) and benzene, toluene, ethylbenzene and o-, p- and m-xylenes (BTEX) compounds are most likely to reach a borehole after a contamination event, and also those that pose the greatest risk.Various gas chromatography-mass spectrometry (GCMS) methods are available for the analysis of volatile organic compounds (VOCs) but many of these are not suitable for rapid and combined analysis of MTBE and BTEX. Here we describe and validate a simple and reliable method that fulfils these requirements. The method is quick: 48 samples can be analysed in a 24 hour period using the Precept II® autosampler and therefore is suitable for high throughput work. Validation of our experiments is presented in the form of linearity, precision and intra-day repeatability of standards as well as limits of detection and limits of quantification for the range 1—20 μg/l.This MTBE/BTEX analytical method developed was used to study the optimization of a modular post-abstraction remediation system incorporating air-stripping and granular activated carbon (GAC) technologies (Hall, 2004), from which a selection of sample data is presented.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
