Abstract
While bimetallic nanocomposites have demonstrated extraordinary – three to even ten-fold – gains in strength with decreasing layer thickness, their strengths tend to plateau beyond a critical layer thickness. More disappointingly, such increases in strength are almost always accompanied by a decrease in their strains to failure (ductility). In this work we report simultaneous improvements in both strength and mechanical stability of Nb/Mg nanolaminates with decreasing layer thicknesses, a trend seldom reported in nanolaminates consisting of pure metals. Using micro-pillar compression and nanoindentation experiments we show that physical vapor deposited (PVD) Nb/Mg nanolaminates that contain a body center cubic (bcc) Mg pseudomorphic phase demonstrate a >60% increase in strength and a >80% increase in strain to failure over those containing the hexagonal close packed (hcp) Mg phase. Instead of a strength plateau, the hcp-to-bcc phase transition in Mg results in a renewed strengthening regime in the nanolaminate caused by the change to a coherent interface from an incoherent one, along with a concurrent increase in strain-to-failure due to the introduction of a more plastically isotropic bcc material from an anisotropic hcp structure. Using high resolution transmission electron microscopy (HR-TEM) we also demonstrate the presence of a thin layer of bcc Mg at the Nb/Mg interface at larger layer thicknesses when Mg is predominantly hcp. Our results suggest that the increases in strain to failure in the Nb/Mg nanolaminates with decreasing layer thicknesses can be corelated to the approximate volume fraction of the pseudomorphic bcc Mg present in the layers.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.