Abstract

Mixed ionic-electronic conductors (MIECs) play a central role in emerging energy conversion and energy efficient computational technologies. However, it is both challenging and resource demanding to characterize MIECs over the broad range of experimental conditions of interest, thereby significantly limiting their study and applications. Here, a novel method of a simultaneous measurement of electrical conductivity and optical absorption of thin films in out-of-equilibrium state, i.e. during a reduction process, is employed for a comprehensive study of a MIEC oxide, PrxCe1-xO2-δ (PCO). It enables, orders of magnitude faster than by established techniques, characterization of the oxygen vacancy and small polaron formation and transport as a function of temperature (demonstrated here down to 200 °C), in a wide range of deviation from stoichiometry, δ. For instance, at 600 °C the PCO properties were obtained during a ten minute reduction process, in the pO2 range from 1 to 10-13 bar. The experimental results show that the oxygen vacancy mobility is constant while the small polaron mobility is linear in δ, in the whole pO2 range, which yields the total conductivity quadratic in δ. Furthermore, the method was applied to study the modification of PCO's transport properties with composition change. It was shown that increasing x from 0.1 to 0.2 suppresses the ionic mobility and, at the same time, enhances the small polaron mobility. Finally, the optically determined δ was used to define an instantaneous oxygen activity in PCO that can be accessed in the out-of-equilibrium experiments. This work opens up new possibilities to study the effects of microstructure, strain and other applied external stimuli on the transport and thermodynamic properties of PCO and similar types of MIEC materials.

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call

Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.