Abstract
Gasification of glucose in near- and supercritical water was investigated at temperature and pressure ranges from 400 to 600°C and 20 to 42.5MPa with a reaction time of 1h. Hydrothermal gasification of glucose was performed in the absence and presence of catalyst (K2CO3) in a batch reactor. The influences of temperature and pressure in the supercritical regimes of water, catalyst were examined in relation to the yield and composition of the gases and aqueous products. The product gases were analyzed by gas chromatography, and the aqueous products were analyzed by high performance liquid chromatography. The gases produced were carbon dioxide, methane, hydrogen, carbon monoxide, and C2–C4 hydrocarbons and there was significant production of aqueous products and residue. The aqueous products composed of oxygenated compounds, including carboxylic acids (glycolic acid, formic acid, acetic acid), furfurals (furfural, 5-hydroxymethyl furfural, 5-methyl furfural), phenols (phenol, methyl phenols, hydroxy phenols, methoxy phenols), aldehydes (formaldehyde, acetaldehyde, acetone, propionaldehyde), ketones (3-methyl-2-cyclo-pentene-1-one, 2-cyclo-pentene-1-one) and their alkylated derivatives. Carbon gasification efficiencies were improved by addition of K2CO3 into the reacting system. Carbon gasification efficiency reached maximum (94%) at 600°C and 20MPa. The yield of hydrogen among gaseous products increased with increasing temperature and decreasing pressure.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.