Simultaneous Determination of Chemical Oxygen Demand, Total Nitrogen, Ammonia, and Phosphate in Surface Water Based on a Multielectrode System.

Abstract

A technique for monitoring chemical oxygen demand (COD), total nitrogen (TN), ammonia (N-NH4), and phosphate (P-PO4) in surface water with a targeted signal multielectrode system (Cu, Ir, Rh, Co(OH)2, and Zr(OH)4 electrodes) is proposed for the first time. Each water quality index is specifically detected by at least two electrodes with distinct selectivity sensing mechanisms. Cyclic voltammetry and electrochemical impedance measurements are employed for multidimensional signal acquisition, complemented by normalization and Least Absolute Shrinkage and Selection Operator (LASSO) for principal feature extraction and dimension reduction. Multiple linear regression (MLR), partial least-squares (PLS), and eXtreme Gradient Boosting (XGBoost) were employed to evaluate the established prediction model. The precisions of the multielectrode system are ±10%/±5 ppm of COD, ±10%/±0.2 ppm of TN, ±5%/±0.1 ppm of N-NH4, and ±5%/±0.01 ppm of P-PO4. The analysis time of the multielectrode system is reduced from hours to minutes compared with traditional analysis, without any sample pretreatment, facilitating continuous online monitoring in the field. The developed multielectrode system offers a feasible strategy for online in situ monitoring of surface water quality.