Abstract
A selective and sensitive adsorptive stripping voltammetric (AdSV) procedure for the simultaneous determination of cadmium, copper and lead in the sea water was conducted. The aim of this research is to get optimum condition for simultaneous determination of cadmium, copper and lead. Adsorptive stripping voltammetry has been used for determination of trace amount of Cd(II), Cu(II) and Pb (II) by using calcon as a complexing agent. The parameters studied were variation of calcon concentration, pH, accumulation potential and accumulation time. In this study, the optimum conditions were calcon concentration of 0.6 mM, pH = 4.0, accumulation potential of -0.7 V and accumulation time of 80 sec. At the optimum conditions, the relative standard deviation were 8.78%, 3.12%, and 4.02% for Cd(II), Cu(II) and Pb(II) respectively for eight replicates (n = 8) measurements of 10 μg/L mixed standard solution of Cd(II), Cu(II) and Pb(II). The method was applied to the direct simultaneous determination of Cd(II), Cu(II) and Pb(II) in sea water around Bungus, Padang City. Concentration of Cd(II), Cu(II) and Pb(II) in samples were equal to 1.8 μg/L for Cd(II), 38.6 μg/L for Cu(II) and 0.7 μg/L for Pb(II) with recovery of 87.03%, 98.80%, and 95.73%, respectively.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.