Abstract
A waveguide-based SPR sensor for double analyte detections was prepared with a single waveguide, and sensing for ammonia and water vapors were carried out. A BK-7 slide glass was used as a waveguide core, and two pairs of Ag films (50 nm) / sensing polymer films with different thicknesses were prepared separately on the waveguide. White light was input from the substrate edge, and the output light spectrum was observed. SPR dips can be separately observed in the output light spectra by selecting the thickness of the polymer film, which govern the SPR condition. Poly(acrylic acid) (PAA) and poly(vinyl alcohol) (PVA) were used as sensing material. PAA responded to both of water and ammonia vapors, and PVA mainly responded to water vapor. Simultaneous measurement would enable precise ammonia measurement under various humidities.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
