Simultaneous deposition of tannic acid and poly(ethylene glycol) to construct the antifouling polymeric coating on Titanium surface

Abstract

Titanium (Ti) and its alloys are primarily explored to produce biomedical implants owing to their improved mechanical stability, corrosion resistance, low density, and good biocompatibility. Despite, Ti substrate surfaces are easily contaminated by plasma proteins and bacteria. Herein, a simple one-step process for the simultaneous deposition of a polyphenol tannic acid (TA) and four-armed poly(ethylene glycol) (PEG10k-4−OH) on the Ti substrate (Ti-TA/PEG) surface was described. Additionally, a two-step process has been employed to fabricate the Ti-TA-PEG surface via successive deposition of TA and PEG10k-4−OH for comparison. The resultant Ti-TA/PEG surface prepared by simultaneous deposition of TA and PEG10k-4−OH exhibits higher coating thickness and better surface coverage than the Ti-TA-PEG surface. The Ti-TA/PEG and Ti-TA-PEG surfaces could actively inhibit the non-specific adsorption of proteins, suppress the bacterial and platelet adhesion, and prevents biofilm formation. Moreover, the Ti-TA/PEG surface displays a better antifouling performance than the Ti-TA-PEG surface. Thus, the present study demonstrates a simple and convenient approach for constructing polymeric coating with good anti-adhesive properties on the Ti substrate surface.