Simultaneous atmospheric CH4, CO2 and O2 detection using fiber-optic switch (FOS)-based time-division multiplexed NIR laser long optical path absorption spectroscopy

Abstract

A near-infrared (NIR) distributed feedback (DFB) laser sensor based on long optical path absorption spectroscopy technique was developed for simultaneous measurement of atmospheric methane (CH4), carbon dioxide (CO2) and oxygen (O2). A fiber-optic switch (FOS) in conjunction with the time-division multiplexing (TDM) technique was adopted to enable different lasers scan over the target gas absorption lines in turn. The long optical path wavelength modulation spectroscopy (WMS) technique with second harmonic detection as well as a laser power fluctuation correction method was used to improve the sensor’s precision and accuracy. For the selected gas absorption lines, located at 6046.945 cm-1, 6361.245 cm-1 and 7877.647 cm-1, the detection limit (1σ) of 0.034 parts per million (ppm) for CH4, 11.921 ppm for CO2 and 0.14% for O2 was achieved according to the concentration and noise level. Allan deviation analysis indicates that the 1-s measurement precision was 0.030 ppm for CH4, 11.518 ppm for CO2 and 0.14% for O2, which could be improved to 6.5E-4 ppm, 0.255 ppm and 0.005% at an optimal average time of 800 s. A two-day continuous measurement of the CH4, CO2, and O2 concentration from ambient air was carried out, which verifies the stability and robustness of the developed multi-gas sensor.