Abstract
A graphene/bismuth nanocomposite film-modified pencil graphite electrode was quickly prepared for the simultaneous analysis of cadmium and lead heavy metal ions by square wave anodic stripping voltammetry. The pencil graphite electrode's surface was directly modified from graphite to graphene with cyclic voltammetry method in a single step by performing potential cycling between - 0.9 and - 1.4 V in 0.2 mol L-1 NaOH modifying solution. A linear relationship between peak current and concentration was obtained in the range between 5-100 μg L-1 for both Cd2+ and Pb2+, with detection limits of 0.12 μg L-1 for Cd2+ and 0.29 μg L-1 for Pb2+. The developed electrode with the proposed method has been applied to a Canadian-certified reference water sample and tap water sample with reliable results. For tap water sample, the obtained results were in a good agreement with the results provided by AAS. Graphical abstract.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.