Abstract

The paradigm of wastewater treatment is shifting from costly pollutant removal in mainstream to resource recovery from sidestream. This paradigm shift, nevertheless, is retarded by the lack of scalable, cost-effective ammonia recovery technologies. The vacuum stripping and absorption (VaSA) process has unrivaled features to recover ammonia and treat digestate simultaneously. The present study introduced a multi-pool boiling mode of vacuum stripping for scale-up design and conducted pilot tests at a water resource recovery facility using a 250-L/batch 3-pool system. It stripped 80.7 % of ammonia in sludge digestate and 91.5 % in pressate in 5-h batch operation. Ammonia mass transfer coefficient reached 0.319–0.485 1/h in digestate and 0.386–0.608 1/h in pressate. The operating challenge was to properly maintain vacuum and configure the demister where vapor–liquid equilibrium changed as it was scaled up. In contrast to the optimum vacuum pressure of 25–27 kPa and feed boiling temperature of 65 °C in the single-pool boiling stripper, the vacuum pressure in the 3-pool boiling stripper was increased to 46.3–46.9 kPa by the higher demister temperature (74 °C). The recovered crystals contained 98.4–103.7 % of (NH4)2SO4. Vacuum-assisted alkali/thermal treatment of digestate under the VaSA conditions increased the dissolved fraction of volatile solids from 7.5 % to 32.8–34.1 % and decreased fecal coliform to mostly undetected. Solids solubilization also resulted in generation of volatile organic compounds, primarily allyl chloride, methylene chloride, 2,5-octadecadiynoic acid methyl ester, and (E)-1,2-dichloroethylene. The low concentrations and small vapor pressures of these compounds were unfavorable for co-stripping. The co-stripped compounds were largely retained in condensate and absent in vacuum exhaust. This study validated the scalability of multi-pool boiling design of VaSA for efficient ammonia recovery and elucidated the effects on digestate treatment.

Full Text
Published version (Free)

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call