Abstract
• The magnetic chitosan/activated carbon bio-nanocomposite was modified with UiO-66 MOFs. • Ultrasound-assisted simultaneous adsorption removal of cobalt (II) ions, malachite green dye, and imidacloprid pesticide from aqueous solution. • The maximum adsorption capacity of adsorbent in a ternary model were, 44.5, 62.1, and 25.2 mg g −1 for Co (II), MG, and IMI respectively. • The adsorption process parameters were optimized by response surface methodology based on central composite design (RSM-CCD). • Adsorption results have been analyzed by isotherm, kinetic, and thermodynamic studies. In this study, the modification of magnetic chitosan/activated carbon bio-nanocomposite (MCS/AC) with UiO-66 MOFs (MCS/AC@UiO-66) was carried out, and the obtained bio-nanocomposite was applied as an efficient adsorbent for the ultrasound-assisted simultaneous adsorption removal of cobalt (II) ions (Co (II)), malachite green (MG) dye, and imidacloprid (IMI) pesticide from aqueous solution. Assessing the possible interaction and optimization of process parameters including pH, sonication time, adsorbent mass and the concentration of adsorbates was carried out by response surface methodology based on central composite design (RSM-CCD). The isotherm experimental data were demonstrated to be great fitted with Langmuir isotherm model, and the maximum capacity values of adsorption in a ternary medium were 44.5 mg g −1 , 62.1 mg g −1 , and 25.2 mg g −1 for Co (II), MG, and IMI, respectively. A better description of the adsorption process was provided by using pseudo-second-order model, meaning that chemical adsorption controlled the process. In addition, the thermodynamic parameters illustrated that the adsorption of all contaminants occurred spontaneously and endothermically. MCS/AC@UiO-66 demonstrated to be a superb reusable adsorbent with a high adsorption capacity even after four adsorption–desorption cycles for the removal of all contaminants from various real wastewater samples. It was concluded that MCS/AC@UiO-66 with excellent properties, such as eco-friendly, easy synthesis, cost-effectiveness, fast adsorption kinetic, high adsorption efficiency, simple magnetic separation, and excellent reusability, could be considered as a promising candidate to remove a wide range of contaminants from wastewaters.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.