Abstract

In order to understand the behavior of the low-temperature water gas shift (WGS) reaction membrane reactor system and obtain better performance of the reactor, numerical simulations are performed with a two-dimensional axisymmetric model. Dimensionless analysis is applied to the governing equations, and then a set of dimensionless parameters are established. The effect of the parameters of Damkohler number (Da) and membrane permeability (Pp) over a wide range on the performance of CO conversion and hydrogen recovery is studied, and the discussion of reaction phenomenon is presented. The WGS reaction is simulated under the operating conditions of 2 atm and two temperatures of 200 and 300 °C. The simulation results suggest that Da=10−4 and Pp=10−1 are the optimum operating conditions for the reactor system where the conversion reaches nearly 100% exceeding the thermodynamic equilibrium conversion by 11% at 300 °C and the optimal hydrogen recovery is achieved simultaneously. The distribution of components along the axis of the reactor is checked, and then two crucial indicators are raised to assess the extent of reaction and hydrogen separation respectively, for the purpose of guidance for the length design of the reactor. Finally, the analysis of the effect of sweep gas on reactor performance suggests that the optimum flow rate of sweep gas is 0.2–0.5 L/min, and further enhancement of performance can be achieved by using counter-current sweep gas configuration.

Full Text
Published version (Free)

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call