Abstract
AbstractThe unintentional formation of a layer as a reaction product between the copper zinc tin sulfide (CZTS) thin film and the Mo back contact reduces cell efficiency due to high sheet resistance and carrier recombination. To limit the formation of , an intentionally grown p‐type Nb‐doped layer can serve as an effective hole transport layer. This study presents a detailed study and calculations for CZTS/Mo‐based solar cells, providing guidelines for calibration. Optimizing cell efficiency is influenced by various interconnected factors in Nb‐doped . While a high carrier concentration in Nb‐doped is assumed to enhance efficiency, other parameters such as band state, optical absorption, and carrier mobility also play crucial roles and can limit cell performance. This simulation study evaluated the effect of Nb‐doped layers with different carrier concentrations to determine the optimal conditions for this p‐type layer. This work reveals that a very thin layer (13 nm) of Nb‐doped p‐type can achieve a maximum efficiency of 11.34% (with = 1.5 ) and that for an Nb‐doped p‐type 62 nm is 15.82 % (with = 4.03 ).
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.