Simulation of vibration stress relief after welding based on FEM

Abstract

A finite element model is developed for the simulation of vibration stress relief (VSR) after welding. For the nonresonant vibration, the reduction in stress strongly depends on the amplitude of vibration. For the resonant vibration, the vibration frequency is the key for stress relief. The vibration frequency should be close to the structure natural frequency for the desired vibration mode. Only small vibration amplitude is required, which will be amplified during vibration. Vibration time does not have a major impact on vibration stress relief. When the amplitude of vibration stress relief is large, the treatment will be more effective.