Abstract
Sliding electrical contacts are subject to surface damage and wear, which can be enhanced by the heating at the interface arising from electrical contact resistance. For example, in electromagnetic launcher (EML) technology, thermally assisted wear processes can result in unacceptable levels of material loss at the armature-rail interface. The control of the interface tribology in sliding electrical contacts requires an understanding of the Joule heating in the vicinity of the interface. In the current study, a multiphysics numerical simulation is conducted of transient heat conduction in both a stationary and a sliding electrical contact. The interface under investigation consists of a flat-ended aluminum cylindrical pin sliding against an aluminum rail. Electrical contact resistance is modeled by introducing a thin layer of high resistivity between the pin and the rail. Results show that shortly after sliding has commenced, (1) the maximum temperature rise occurs in the bulk of the pin rather than at the interface, (2) the bulk of the Joule heat goes into the rail, and (3) that sliding can have a significant effect on the temperature field, even when the speed is quite low.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
