Abstract
The article presents the main results of research on the development of a physical and mathematical model of the technological process of collecting flax seeds with a combing header and the justification of the range of its operating parameters based on software simulation and numerical modeling. The process of harvesting agricultural crops, including oil flax, is an important technological operation of their production in the agricultural sector of Ukraine. The positive dynamics of the growth of oil flax production, which is due to the growing demand for seeds in the domestic and foreign markets, requires the intensification of harvesting equipment technological processes. The main reasons for restraining the production of oil flax are the imperfection of the equipment for harvesting and the inconsistency of the quality indicators of work with the established requirements. One of the directions for solving this problem is the technology of harvesting by stripping plants on the standing. Timely harvesting of oil flax seeds in optimal agrotechnical terms (plant condition, weather conditions, weediness, etc.) with minimal losses and contamination of the heap is one of the important scientific tasks of improving harvesting technology. Improving the efficiency of collecting oil flax seeds and, as a result, improving the quality of products requires new approaches to the development and implementation of technical means in progressive technologies. As a result of numerical modeling of the separation process of a heap in a combing header with a curvilinear casing shape, taking into account the physical and mechanical properties of its components, the dependences of the mass fraction of husk and stem particles leaving its area (an indicator of the quality of cleaning the heap from impurities) δh and the fraction of seeds and capsules leaving with seeds (seed loss index) δs from the rotation frequency of the beater-reflector n1 and the stripping drum n2, the position of the transparent zone of the boundary L and its width B. Solving the compromise problem, namely, maximizing the mass fraction of husk and stalk particles leaving the header area (quality indicator cleaning the heap from impurities) δh and minimizing the proportion of seeds and seed boxes leaving the header area (seed loss index) δs Obtained rational design and technological parameters of the combing type header with a curved casing: rotation frequency of the beater-reflector n1 = 782 rpm, combing drum rotation speed n2 = 671 rpm, transparent position zone of the boundaries L = 0.82 m and its width B = 0.45 m. In this case, the mass fraction of husk and stem particles leaving is δh = 42.4%, and the fraction of losses of seeds and capsules with seeds from the header area is in accordance with δs = 2.5%.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have