Abstract

In the previous part of this work (Chem. Eng. Sci. 54 (1999) 5887), a multiblock simulation model was developed in order to allow the close examination of different regions of a stirred tank for drop size distribution calculations. In this paper, that model is tested in a parameter fitting procedure. The drop breakage and coalescence parameters are fitted against drop size measurements from dense liquid–liquid dispersions, which were assumed fully turbulent. Since the local turbulence and flow values of a stirred tank are used in the present model, the fundamental breakage and coalescence phenomena can be examined more closely. Furthermore, the present model is capable of predicting inhomogeneities occurring in a stirred tank. It is also to be considered as an improved tool for process scale-up, compared to the simple vessel-averaged population balance approach, or use of correlations of dimensionless numbers only. The present model can use two sources of data for fitting parameters in the drop rate functions. One is to use transient data of the measured drop size distribution as the impeller speed is changed. The other is to use time-averaged data measured at different locations of the stirred tank. It is shown in this paper that the different flow regions can be chosen from the CFD simulations in a straightforward manner. CFD flow simulation results can be used to select the flow regions when no experimentally obtained flow conditions are available. This is especially useful for non-standard vessels, such as reactors containing cooling coils. After fitting the parameters with a multiblock model, the population balance model can be rather easily incorporated into a commercial CFD program to investigate different flow conditions.

Full Text
Paper version not known

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call

Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.