Simulation of Multi-Phase Flow in Autoclaves Using a Coupled CFD-DPM Approach

Abstract

In this work, a numerical simulation study on the mixing characteristics of multiphase flow in an autoclave was carried out using CFD technology. The Eulerian–Eulerian model and discrete phase model (DPM) were employed to investigate the solid holdup, critical suspension speed, nonuniformity of solid suspension, gas holdup distribution, bubble tracks, and residence time during stirring leaching in the autoclave. Experiments validate the accuracy of the numerical model, and the experimental values correspond well with the simulation results. The numerical simulation results show that the solid–liquid mixing is mainly affected by the axial flow, the best agitation speed is 400 rpm, and increasing the speed further cannot make the mixture more homogenous and buildup occurred above the autoclave. The calculated critical suspension speed is 406 rpm, which is slightly lower than that obtained from the empirical formula. The gas phase is mainly concentrated in the vortex area above the blade. When the gas phase is in a completely dispersed state (N = 300 rpm), the average residence time of the bubbles is 5.66 s.