Simulation of Jeddah multi-port sea outfall

Abstract

Jeddah wastewater multi-port outfall was analyzed using CORMIX2 for average ambient conditions. The numerical analysis of the outfall shows that the near-field mixing extends 187.5 m downstream of the diffuser and the dilution at the end of near-field reaches 1,047.8. The concentration of the plume drops sharply from 100 at the exit point to 0.0954 at the end of near-field zone. In the far-field zone the reduction in concentration is gradual and will reach 0.0061 at a distance of 20,000 m downstream of the diffuser, while dilution exceeds 16,440 at this point. The plume rises rapidly due to the buoyancy and touches the water surface at a distance of 187.5 m downstream. The thickness of the plume reaches a maximum value of 37.5 m at the interface of near-field and far-Field zones, and then it starts spreading horizontally maintaining a thickness of about 13 m over a distance of about 4 km. As the plume mixes with ambient sea water, it starts spreading again in vertical direction and fills the entire water depth at a distance of 18,927 m down stream. The plume maintains nearly a constant width in the near-field zone but spreads progressively horizontally in the far-field zone till the plume touches the left bank at a distance of 18,482.52 m downstream. The plume spreads at a distance of 2,069 m from the coastline at the end of simulation zone. It can be concluded from numerical results that if the discharged water meets local and international standards for treated wastewater, the plume will not pose any threats to the local venerable environment as the dilution is considerably high due to high exit momentum and favorable cross current.