Abstract

In this work, p-type polarization-induced doping (PID) recessed-gate p-channel InGaN/GaN/AlGaN heterostructure field-effect transistors (HFETs) are proposed. It is found that the current density of the device can be increased by introducing an InGaN/GaN/AlGaN heterojunction and p-type PID. The simulation results show that the current density can apparently be increased (from 3.42 mA mm−1 to 7.31 mA mm−1) due to the increased hole concentration introduced by the InGaN/GaN/AlGaN heterojunction and the p-type PID. Different threshold voltages can be obtained by adjusting the GaN channel thickness, and normally-off p-channel HFETs with a negative V TH of −1 V were produced when a 6 nm GaN channel thickness was retained. These results may provide some reference information for the design of E-mode high-performance p-channel GaN devices.

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call

Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.