Simulation of Air Flow Field and Temperature Distribution in the Ward of a Newly-Built Hospital of Post-COVID-19

Abstract

In order to solve the problem of uneven distribution of air conditioning temperature and air velocity in the ward, it is easy to produce the uncomfortable feeling of cold and hot and wind blowing. Taking the standard double room general ward of a newly built hospital as the research object, a mathematical model was established, and CFD software was used to numerically simulate the temperature field and velocity field of the air in the ward, optimize the location of the air outlet, and put forward the suggestion of the optimal installation location of the hospital bed. The results show that when the fan coiler air supply outlet is close to the west wall and the fresh air outlet is far away from the west wall, the inhomogeneity of the distribution of the temperature field and velocity field in the ward is reduced, and at this time, the temperature and velocity distribution of the air in the ward is more uniform, so that the patients’ overall feeling in the ward is more comfortable, and at this time, the installation position of the air outlet is more reasonable; and it is determined that the optimal placement of the beds in the room is at the locations of [Formula: see text] = 2 m, [Formula: see text] = 2.5 m and [Formula: see text] = 2 m, [Formula: see text] = 4.5 m, and at this time the two beds are at the same time, which is more reasonable. When [Formula: see text] = 4.5 m, the temperature difference between the two beds is less than 0.5 K, the wind speed difference is not more than 0.08 m/s, and the velocity gradient direction is the same.