Abstract
A computer simulation was performed using a commercial process simulator, Aspen Plus, for NMP (Nmethyl-2-pyrrolidone) extractive distillation process to separate 1,3-butadiene from the C4 hydrocarbon mixtures. The Redlich-Kwong equation of state and NRTL activity coefficient model were used to calculate thermodynamic properties in the simulation of the extractive distillation process. Binary parameters of the NRTL model not provided in the simulator were estimated using the UNIFAC method. The simulation results of the 1,3-butadiene recovery from the C4 mixtures were in good agreement with the plant operation data. The process simulation showed that the material balances in the extractive distillation were successfully predicted for various NMP solvent flow rates. The results obtained in this work provided the optimum solvent rate and the reflux ratio for the NMP extractive distillation process to separate 1,3-butadiene from the C4 mixtures.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
