Abstract
In this investigation, transparent photothermal coatings utilizing plasmonic copper chalcogenide (Cu2-xS) nanoparticles were designed and fabricated for the deicing of glass surfaces. Cu2-xS nanoparticles, chosen for their high near-infrared (NIR) absorption and efficient photothermal conversion, were analyzed via finite difference time domain (FDTD) simulations to optimize nanoparticle morphology, thus avoiding costly trial-and-error synthesis. FDTD simulations determined that Cu2-xS nanorods (Cu-NRs) with an optimal aspect ratio of 2.2 had superior NIR absorption. Guided by FDTD simulations, the composite coating composed of Cu-NRs in clear acrylic resin paint was brush-coated to glass, achieving 62.4% visual transmittance and over 95% NIR absorbance. Photothermal conversion tests exhibited a significant temperature increase, with the coating reaching 65 °C under NIR irradiation within 6 min. The dynamic deicing process of ice beads on the coating at -20 °C completed within 220s, in contrast to the frozen state on glass coated with clear acrylic resin paint. Furthermore, heat transfer simulations in COMSOL illustrated melting initiation at the ice-coating interface and subsequent progression through the ice layer. This simulation-driven synthesis method and photothermal testing offer a design framework for the fabrication of photothermal deicing coatings with applications for automobiles, buildings, and aircraft in cold environments.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.