Abstract

<p>The main goal of this research is to develop equations which can be used for predicting the cyclic response of steel beam-column connections with superelastic Shape Memory Alloy (SMA) bolts and steel angles. Finite-element (FE) models are developed to simulate the cyclic behavior of SMA connections. The results are then validated against seven specimens from a previous experimental study. The validated models are used to perform sensitivity and response surface studies. Beam web slenderness ratio, SMA bolt diameter, and angle thickness are identified as the most significant factors affecting the cyclic response of SMA connections. Angle yielding is also found to be the dominant limit state in all connections, confirming their robust self-centering response. It is recommended to use beams of lower depth to minimize residual deformations and avoid early bolt fracture in these connections. The developed surrogate models can be used to accurately predict the SMA connections’ cyclic response.</p>

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call

Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.