Abstract
Introduction is given to the content of activated sludge model No.3 (ASM3). The simulation program which based on the integration of ASM3 and Anaerobic Digestion Model was used to simulate A2/O with AquaMats Process. The predicted results of effluent COD, NH3-N and NO3-N accorded with the actuality. The removal efficiency of TP was quite low when sludge return rate was 100%. Based on this condition, the improved scheme which adjusts sludge reflux ratio to 60% was put forward and simulated. Process was optimized depending on the simulation results and the removal efficiencies of COD, NH3-N and TP reached to 83.1%, 98.75 and 24.01%. It is verified that ASM3 can be used as the platform of activated sludge process design.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
