Abstract
In order to improve the measurement accuracy of fuel injection quantity based on Test Bench for fuel injection Pump (abbr. TB4P), on the basis of the function between needle valve lift and fuel injection quantity, two-level pressure adjustment module, which combines proportional flow rate valve with pressure sensor and takes advantage of spring of fuel injector, is used to control the outlet pressure of fuel injection pump, which results in the fuel injection pressure stably. Fuel injection pump and fuel injector are modeled by use of HCD of AMESim, and the system model of fuel injection quantity measurement is built. Simulation curve of fuel injection quantity is got by AMESim, which is compared with the curve of standard fuel injection quantity according to relative error. The results show that the relative error from the data of simulation system is smaller, so the methods of measurement and simulation in this paper are effective.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have