Simulation and experimental validation of vehicle dynamic characteristics for displacement-sensitive shock absorber using fluid-flow modelling

Abstract

In this study, a new mathematical dynamic model of shock absorber is proposed to predict the dynamic characteristics of an automotive system. The performance of shock absorber is directly related to the car behaviours and performance, both for handling and ride comfort. Damping characteristics of automotive can be analysed by considering the performance of displacement-sensitive shock absorber (DSSA) for the ride comfort. The proposed model of the DSSA is considered as two modes of damping force (i.e. soft and hard) according to the position of piston. For the simulation validation of vehicle-dynamic characteristics, the DSSA is mathematically modelled by considering the fluid flow in chamber and valve in accordance with the hard, transient and soft zone. And the vehicle dynamic characteristic of the DSSA is analysed using quarter car model. To show the effectiveness of the proposed damper, the analysed results of damping characteristics were compared with the experimental results, which showed similar behaviour with the corresponding experimental one. The simulation results of frequency response are compared with the ones of passive shock absorber. From the simulation results of the DSSA, it can be concluded that the ride comfort of the DSSA increased at the low-amplitude road condition and the driving safety was increased partially at the high-amplitude road condition. The results reported herein will provide a better understanding of the shock absorber. Moreover, it is believed that those properties of the results can be utilised in the dynamic design of the automotive system.